|
back> The Olive building technical description Building structure Fundamentals – the monolith reinforced concrete fundamentals plate with the concentration under the colons and with the basement walls. The external walls – the two monolith reinforced concrete block masonry, the other – ceramist concrete block masonry with the width of 250 mm The overhead covers – the monolith reinforced concrete overhead cover plates, which are based on the monolith reinforced concrete colons and walls The walls The external walls – built from the blocks of the ceramist concrete (width of 250 mm), heated with the 150 mm wide stone wool, from the interior rendered with the machine rendering equipment Facades The internal walls – in-between the flats (commercial premises) – ceramist concrete blocks (width of 200 mm), in the boundaries of one flat (commercial premises) – metal profile framework, filled with the stone wool (width of 75 mm), weather boarded with two regipse layers The bearing constructions – the monolith reinforced concrete walls and colons The not bearing constructions – the ceramist concrete block masonry, regipse The windows The glass facade systems – the aluminum glass facade systems (Reynaers) The windows – PVC windows The doors The entrance door – wooden, veneered, smooth-faced The entrance door in-between the staircase and the elevator hall – doesn’t exist The roof The roof construction – the roof construction, joined in the axels 1-6/A-E from the monolith reinforced concrete, in the axels 1-6/E-H ridged roof, the bearing construction of which – the metal colon and trimmers, the wooden colons, the wall-plates, purlins with the wooden rafter overhead covering Roof overhead covering – in the axels 1-6/A-E melted reel material, in the axels 1-6/E-H leading cylinder profile roof The finish of the premises of the common use The walls of the premises of the common use – rendered, puttied, painted The ceilings of the premises of the common use – puttied, painted The facilities of the premises of the common use – doesn’t exist The floors of the staircases – flagged, Ceramiche Caesar The footsteps - flagged The heat supply The building has its own gas boilerIn the flats (commercial premises) it is envisaged to provide the premises heating system, by means of using the heating radiators Purmo VKO with the lower part connection of the 33 type, in order the radiators would be more compact. The lower part connection of the radiators reduces till the minimum the number of the visible pipes and improves the esthetical outlook.In the bathrooms and toilet rooms the warm floors DEVI are envisaged with the electrical heating, as well as the electrical towel drying equipments are foreseen (in the flats). Ventilation The ventilation in the flats (commercial promises) is being organized with the help of the supply and outflow models, as well as through the window openings. The supply models react to the level of the air humidity in the premises and let in such amount of the fresh air, which is necessary. The supply models are built-in in the dwelling rooms. The place for the montage is envisaged in the frames of the windows or in the external walls. The permeability of one model is from 5 to 40 m3/h. The openings are necessary under the doors, in order the air could circulate also after the door have been closed. The outflow of the air is organized from the bath rooms and the toilet rooms with the help of the central air outflow models. In the kitchens the reek draining equipments are envisaged, which are attached to the separate sucking air pipe. The coldness supply the common coldness supply of the building isn’t envisaged The water supply and drainage The source of the water supply – the city water main pipe with 100 mm in diameter, located on J. Asara Street The external and the internal drainage system is envisaged to be constructed from the plastic material drainpipes The safety The project of the security signalization is fulfilled, in order to provide the opportunity for the security of the centralized flat premises. In the reception premise the central panel and the keyboard is being installed. In each of the property the movement sensors are set up, in the case of the alert the signal is being transferred to the security company The elevators – Kone Latvia For the project the two elevators are envisaged, each of them has: The carrying capacity – 1000 kg/13 passengers Velocity – 1 m/s The Olive flats technical description The external partition walls The external partition walls of the separate properties – metal profile framework, filled with the stone wool (width of 75 mm), weather boarded with two regips layers, puttied, painted In the bath rooms and the toilet rooms – flagging, the flags Cifre Ceramiche (Spain), the colorings are lightly green, orange, brown The floors The floors in the separate properties – shield parquet (oak) Salons Objekts In the bath rooms and in the toilet rooms the floors are flagged with the heating equipment, Cifre Ceramiche (Spain), the colorings are lightly green, orange, brown In the kitchen zones – flagging floors The ceilings In the separate properties the ceilings are putted, painted, in the kitchen zones and in the bath rooms – regips hanged Te doors The inner doors – wooden donors with the MDF plate, veneered. The plumbing - Duravit catalogue D-Code Electricity supply networks, the low intensity current networks The electric power supply to the house In the separate properties TV, Internet – in each flat the switch-boards and sockets are put in, the possible TV and Internet service provider has to connect (cut in) in the separate low intensity current allocation premise in the basement floor. In each property the fire security signalization with the sensors is installed, in the case of the emergency the signal is being transferred to the firefighters. back to top> |
|
|
|